Description of 800BPH heat resistant juice milk hot filling bottle blow molding machine
1200R heat-resistant bottle blow molding machine is suitable for producing PET plastic containers and bottles from 10-1000ml. It is especially used for hot fill bottles. Also it can be widely used to produce the carbonated bottle, mineral water pesticide bottle oil bottle cosmetics, wide-mouth bottle etc.
A. Multifunctional Semi auto PET heat resistant bottle blow molding machine is suitable for blowing carbonated beverage bottles, mineral water bottles, cosmetic bottles, oil bottles, space cups, jars, medicine bottles and other hollow plastic containers (PET.PC.AS.PE)
B. The infrared multifunctional plastic preform heater is powered by a three-phase four-wire 380V power supply (220V power supply can also be used). The machine is divided into seven heating tubes, divided into four heating zones, and electric heating control elements are installed in the electrical box. The preheating time is generally about 5-8 minutes. The temperature is conveyed by the electric thermocouple to the temperature controller for automatic temperature control, so that the temperature in the heating box is controlled steadily, and the infrared penetrating power is strong. The heating is uniform. Fast and reliable to ensure the preform There is an ideal heating effect. After the preform is heated for one cycle, the production will be carried out. The specific temperature is adjusted according to the bottle forming needs.
C. The width and height of the lamp tube and reflector in the heating zone can be adjusted to suit the heating of preforms of different structures, and there is an automatic temperature exhaust device to ensure the constant temperature of the drying tunnel;
D. Each mechanical action has a safety self-locking device. When a process fails, the program will automatically switch to a safe state. This machine is suitable for blowing high-temperature resistant bottles, with a temperature resistance of up to 90 degrees Celsius. Solve the usual packaging problems of beverages, juices and other liquids that require hot filling.
Equipment list of 800BPH Semi auto PET heat resistant bottle blow molding machine:
| Items | Name of machine | Model | Size(mm) | Qty. |
| 1, 1+1 PET heat resistant bottle blow molding machine |
| 1.1 | Preform heater | BL-1200R | 1800*700*1400 | 1set |
| 1.2 | Blow molding machine | 1650*650*1600 | 1set |
| 1.3 | Mould heater | / | 1set |
| 1.4 | HP air compressor | 1.6m3/min 30Kg | 1880*850*1050 | 1set |
| 1.5 | Ultra HP air cooling dryer | 2.0m3/min 30Kg | 1050*650*1100 | 1set |
| 1.6 | HP air filter | 2.0m3 3Mpa | ∮350*750 | 2set |
| 1.7 | Mould Chiller | 3HP | 1100*680*1200 | 1 set |
| 1.8.2 | Blow mold | 500ml | / | 1 set |
Parameters of 800BPH Semi auto PET heat resistant bottle blow molding machine:
| Model | 1200R Hot filling |
| Container | Product material | PET |
| Volume | 0.1L-1L |
| Theoretical output | 600-800PCS/H |
| Preform length | 15mm-350mm |
| Preform inner diameter | φ5mm-38mm |
| Moulding | Max.mould plate Dimenstion(L x W) | 350x380mm |
| Max.mould thickness | 180mm |
| Clamping force | 45KN |
| Mould opening stroke | 160mm |
| Machine size and weight | Main machine (L x W x H) | 1650*650*1600mm |
| Main machine weight | 500Kg |
| Heater (L x W x H) | 1800*700*1600mm |
| Heater weight | 250Kg |
| Power | 24.8kw |
Oil Mould heater:
| Heat transfer media: heat transfer fluid | Maximum temperature: 200℃ |
| Heat media inlet & outlet: 3/8 ”mm | Actual cooling capacity: 2000Kcal/h |
| Heating barrel: iron | Heating wire: 304 stainless steel |
| Overall dimension: 739*310*643mm | Net weight: 52kg |
| Temperature error: ±1℃ | Microcomputer board error: ±0.5℃ |
| Pipe type: teflon pipe | Number of interface: two in and two out(can be customized) |
