Description of Double side self-adhesive sticker roll flat plastic bottle labeling machine
The double-sided labeling machine adopts the vertical labeling method, and is equipped with special positioning and topping devices to ensure the stability of the bottle; the head can be adjusted up and down, forward and backward, and tilted, suitable for labeling any irregularly shaped parts; special installation The label pressing device ensures that the label is smooth and close to the body; the rotary encoder is used for tracking, and the speed of the conveyor belt can be adjusted at will, and the speed of the label is always synchronized with it. Labeling on irregularly shaped parts; installing a special pressing device to ensure that the label fits smoothly; using a rotary encoder to track, the conveyor belt can be adjusted at will, and the speed of labeling is always synchronized with it.
Labeling is a part of the packaging process. The neatness and integrity of the label directly affects the appearance of the entire product. Therefore, the use of a double-sided labeling machine is very important. However, in the daily use of the double-sided labeling machine, it is inevitable that some problems will be encountered. Below we list three common problems.
1. Label cracks. After the label is die-cut into a finished product, the bottom paper is usually left wider. The main purpose of this is to better expose the label during use. In the process of handling or transportation, these extra edge parts will be cracked, causing small cracks. Another part of the reason is that the labeling machine itself has a certain tension during the automatic labeling process, and the label is also very broken under this tension.
2. Poor die-cutting. The quality of die-cutting has a profound impact on whether the label is torn. If the die-cutting pressure is too large, the bottom paper will break. Usually due to the tearing caused by die-cutting, the position of the die-cutting line at the crack will be relatively neat.
3. The glue oozes out. The glue oozes out because the label is rewinded too tightly, squeezing out the wet glue.
Technical parameter of double side self-adhesive labeling machine:
| No | Item | Parameter |
| 1 | Main Material | Stainless Steel 304, Aluminum Alloy 6061 |
| 2 | Dimension | L 2500mm * W 1300mm * H 1400mm |
| 3 | Voltage | 220V/50Hz |
| 4 | Power | 1200 W |
| 5 | Production Capacity | 7500pcs/h 0-40m/min |
| 6 | Labeling Accuracy | +/- 1mm beak edge |
| 7 | Label Roll Core | 76 mm |
| 8 | Label Roll Diameter | 350 mm |
| 9 | Label Width | 10~110 mm (special size can be customized) |
| 10 | Label Length | 20~360 mm (special size can be customized) |
| 11 | Bottle Diameter | 30~90 mm (special size can be customized) |
| 12 | Bottle Height | 30~200 mm (special size can be customized) |
Main Configuration of double side self-adhesive labeling machine:
| No. | Item | Brand | Origin |
| 1 | PLC | Siemens | Germany |
| 2 | Touch Screen | WEINVIEW | Taiwan |
| 3 | Variable-frequency Drive | Schneider | France |
| 4 | Intermediate Relay | Schneider | France |
| 5 | Circuit-breaker | Schneider | France |
| 6 | Sensor | Panasonic | Japan |
| 7 | Stepper Motor Drive | FOYO | China |
| 8 | Variable frequency motor | Panasonic | Japan |
| 9 | Speed regulation motor | Panasonic | Japan |
| 10 | Gear box | Panasonic | Japan |
| 11 | Switch power | Mingwei | Taiwan |
| Tool Box List |
| No. | Item | Specification | Quantity |
| 1 | Open Wrench | 14, 12, 8, 10 | 1 set |
| 2 | Movement Wrench | 250 × 30 | 1 set |
| 3 | Inner Hexagonal Wrench | seven in all | 1 set |
| 4 | Clubs Screwdriver | 6×100 mm, 3×75 mm | 1 set |
| 5 | Open Screwdriver | 6×100 mm, 3×75 mm | 1 set |
